Cardboard Recycling Container Overview

Recycling containers come in many sizes and configurations.  The CCS Recycling Container is designed to make the hauling, loading and unloading of recycled material as simple as possible.

Usually constructed as a light duty roll off with plastic sliding doors on a “A” or “Hip” shaped roof and dividers inside the container to allow for the safe and secure deposit and hauling of various materials.Typical recycling containers are used for cardboard, newspaper, plastic, glass, metal in separate compartments or commingled.




Product Specs

  • Floor Plate: 3/16″ Sheet (Upgrade available)
  • Cross Members: 4.1″ Structural Channel on 16″ Centers
  • Side Rails: Formed 3/16″
  • Gussets: 3/16″ gusset on every channel
  • Main Rails: 6″x 2″x1/4″ Structural Tubing
  • Wheels: 8″x10″ Heavy Duty Ground Rollers Front & Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings on rear
  • Bull Noses: 1-3/8″ Plate
  • Guide Rollers: 4″x4″ Solid tubing with grease fittings
  • Roller Arms: 1/2″ Plate
  • Roller Axles: 1-15/16″ Round Bar with Grease Fittings
  • Hook Plate: 1/2″ Plate 12″x38″ Welded Solid Rail to Rail
  • Cable Hook: 1-1/4″ High Tensile Plate Inserted through hook plate, locked in and welded fully on both sides
  • Side Sheets: 11 Gauge
  • Side Posts/Rear Frame: 11 Gauge formed plate 3″x5″, 4-way bend, 11 Posts per Side
  • Top Rails: 4″X3″X11 Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Stiffeners: 3/16″ Plate Welded fully on each side
  • Tailgate Sheet: 11 Gauge
  • Door Framing: 4″X3″X11 Gauge Structural Tubing
  • Reinforcing: 4″X3″X11 Gauge Structural Tubing
  • Hinge Plates: 1/2″ Plate, 3″x9″ on Door and 9″x9″ on sidewall
  • Hinge Sleeves: 1-3/4″x9″ Heavy Duty Tubing (5/16″ wall with Grease fittings)
  • Hinge Pins: 1-1/4″x9″ Solid Round Bar
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
  • Safety Chain: 3/8″ High Test Chain w/ Receptors on both sides
  • Gate Aligner: 1/2″ Plate
  • Roof: 11 Gauge Hip or “A” Shaped Roof with Sliding Plastic Doors
  • Paint: Fully cleaned with biodegradable solvent and Painted with High Solid, Low VOC Direct to Metal Paint

Product Options

Hooklift, Latch System, Lighter or Heavier Gauge for Floors, Sides, Top Rails & Cross member Spacing



Downloads

Download the Latest Spec Sheet
Download the Product Warranty



Color Options

Click to View Chart



Request a Quote

Click Here to Get a Quote Today